Skip to product information
Vigilant Herbicide Gel - 240ml Bottle
SKU: VIGIGEL
$101.17 ex. GST
stock.svg

Stock Availability

  • Braeside VIC
    In stock
  • Mount Barker SA
    In stock
  • Wetherill Park NSW
    In stock
warehouse-duotone-light-full.svg

Pickup Information

If ordering for pickup, please ensure items are available in your local warehouse. Wait times will apply for stock transfers between locations.

free-delivery.svg

Free delivery on orders over $500 (excluding Bulky goods) // Delivery Policy

Description
Vigilant II is a ready to use gel developed especially to control a wide range of woody weeds and trees, scrambling weeds and vines and general broadleaf weeds – includes built-in applicator.
  • Minimal risk to non-target plants
  • Use in sensitive areas – No spray drift
  • Low toxicity & minimum risk to the environment
  • Suits native vegetation regeneration & restoration work
  • Formulated as a gel, Vigilant II is ready to use straight out of the pack. No messy chemicals and limited user exposure
  • The 240ml applicator brush bottle is re-usable and can be refilled from a bulk pack
  • The brush bottle of Vigilant II can treat approximately 120 stems (Average stem of 25 mm diameter applied as a 5 mm dollop of gel)
  • Vigilant II can be used year round, although effectiveness may decrease slightly in colder months and cooler climates
Vigilant II contains the powerful and proven active ingredient aminopyralid which offers;
  • Faster brownout and knockdown
  • Extended weed spectrum
  • Improved robustness
Cut stump application - now it’s even easier to fight woody weeds:
  • Step 1. Cut stems horizontally 20 mm and preferably no higher than 100 mm above ground level.
  • Step 2. Squeeze Vigilant II brush bottle to apply a 3-5 mm thick layer of gel over the cut stem surface remaining on the plant.
  • Step 3. Repeat on other weeds until gel in bottle is finished.
  • Notes: On stems greater than 20 mm in diameter apply at least a 5 mm thick layer on the cut stem surface remaining on the plant. On multi-stemmed plants, treat the main stems as well as all the other minor stems for the same plant. Vigilant II should be applied immediately to the cut stem – certainly no longer than one minute after you’ve made the initial cut. If treating old stumps, re-cut and then apply.
Scrape & paint technique:
  • Step 1. Cut a series of blazes 15-20 mm deep around the main trunks of the tree with an axe or pruning saw; make the blazes evenly spaced with no more than a 20-40 mm gap between each blaze.
  • Step 2. Squeeze Vigilant II brush bottle to apply 5 mm thick layer over the lower cut surface of each blaze.
Drill & fill technique:
  • Step 1. On rhizomatous plants prune the shoots horizontally and if more than four rhizomes per shoot drill a 10 mm hole in every fourth rhizome to a depth of 80% of the rhizome.
  • Step 2. Squeeze Vigilant II brush bottle to apply 3-5 mm thick layer across the cut surface or fill the drill hole with Vigilant II.
Downloads

VIGIGEL (MSDS)

Key Features
  • No messy chemicals and limited user exposure the 240ml applicator brush bottle is re-usable and can be refilled from a bulk pack the brush bottle of vigilant ii can treat approximately 120 stems (average stem of 25 mm diameter applied as a 5 mm dollop of gel) vigilant ii can be used year round, although effectiveness may decrease slightly in colder months and cooler climates vigilant ii contains the powerful and proven active ingredient aminopyralid which offers; faster brownout and knockdown extended weed spectrum improved robustness cut stump application - now it's even easier to fight woody weeds: step 1
  • Cut a series of blazes 15-20 mm deep around the main trunks of the tree with an axe or pruning saw; make the blazes evenly spaced with no more than a 20-40 mm gap between each blaze
  • Cut stems horizontally 20 mm and preferably no higher than 100 mm above ground level
  • Notes: on stems greater than 20 mm in diameter apply at least a 5 mm thick layer on the cut stem surface remaining on the plant
  • On multi-stemmed plants, treat the main stems as well as all the other minor stems for the same plant
  • On rhizomatous plants prune the shoots horizontally and if more than four rhizomes per shoot drill a 10 mm hole in every fourth rhizome to a depth of 80% of the rhizome
  • Squeeze vigilant ii brush bottle to apply 3-5 mm thick layer across the cut surface or fill the drill hole with vigilant ii
  • Squeeze vigilant ii brush bottle to apply 5 mm thick layer over the lower cut surface of each blaze
  • Squeeze vigilant ii brush bottle to apply a 3-5 mm thick layer of gel over the cut stem surface remaining on the plant
  • Vigilant ii should be applied immediately to the cut stem â?? certainly no longer than one minute after you've made the initial cut
Brand

Corteva provides advanced agricultural and vegetation management solutions supporting crop health and weed control.

Specifications
  • Width (mm): 130
  • Depth (mm): 70
  • Height (mm): 200
  • Model: VIGIGEL
  • Brand: Corteva