Industry Protection

  • Petzl Vertex Vent Helmet - Orange
    A comfortable helmet with adjustable ventilation designed for work at height and rescue. Polycarbonate shell with side slots for mounting a face shield and/ or standard hearing protection. Integral headlamp clips, simple headband adjustment with two height positions. Headband adjustment from 53cm - 63cm. See the Petzl Vizir for optional eye protection.
  • Petzl Vertex Vent Helmet - Red
    A comfortable helmet with adjustable ventilation designed for work at height and rescue. Polycarbonate shell with side slots for mounting a face shield and/ or standard hearing protection. Integral headlamp clips, simple headband adjustment with two height positions. Headband adjustment from 53cm - 63cm. See the Petzl Vizir for optional eye protection.
  • Petzl Vertex Vent Helmet - White
    A comfortable helmet with adjustable ventilation designed for work at height and rescue. Polycarbonate shell with side slots for mounting a face shield and/ or standard hearing protection. Integral headlamp clips, simple headband adjustment with two height positions. Headband adjustment from 53cm - 63cm. See the Petzl Vizir for optional eye protection.
  • SnakeProtex™ Snake Protective Chaps - Large
    OHS policies affecting councils, landscape contractors and other businesses require adequate personal protective equipment (PPE) for employees. Protection for outside workers from snakes is an issue fast becoming a recognised critical need. The result of several months’ investigation, design and testing is Snakeprotex™. This is a pair of gaiters designed to protect the lower leg (knee to ankle).

    Five of the most common venomous Australian snakes were put in the vicinity of Snakeprotex™ and encouraged to bite the fabric which was fitted to a realistically sized dummy leg. None of the bites resulted in venom penetration through the garment. To quote from the test report provided by the herpetologist; “In all cases when a snake bit the gaiter on the modelleg or bit the gaiter separately, no venom was detected on the inside of the gaiter, even when examined under magnification.” For more information please contact Arborgreen.

    Measurement:
    Circumference at Knee: 520mm
    Length 400mm
    To fit leg circumference: Up to 490mm
    These sizes are approximate, and measured (leg circumference) over your trousers
  • Peltor Steel Mesh Visor
    Peltor Face visor complete, to attach H10P3G Peltor Cap attach Muffs. Steel Mesh with open Spacing for improved breathability. Also has short brim for sun protection.
  • Peltor Brushcutter Forestry Headgear Combination
    The 3M™ Headgear G500 provides a versatile and comfortable solution for wearers who require both face and hearing protection. With special design features making it easy to combine the headgear with other 3M safety products such as face shields and earmuffs.

    • A practical, convenient solution for face and hearing protection where no head protection is needed.
    • Frontcover provides ventilation for increased comfort.
    • Mesh Face Shield: + 5C (Stainless Steel) is approved for 'High Speed Particles' 45m/s (F) according to EN1731.
    • To increase eye protection, G500 can incorporate the integrated eye protection range (V6*), that are available in clear, grey and yellow.
    • Hearing Protection: Thanks to the robust design of the headband, G500 can be used both with and without earmuffs. The slot is 30 mm and fits the PELTOR P3E-earmuff attachment.
    • Headband is slotted for the attachment of earmuffs.
  • CLOGGER Line Trimmer Chaps - Navy
    These padded leg protectors are ideal for users of linetrimmers, brushcutters, lawnmowers and other landscaping powertools. These chaps are designed to protect your lower legs from flying stones and debris. One size fits all.
  • Clogger Fireshield Trousers 79cm
    CLOGGER Proban FireShield Trousers 79cm
  • SnakeProtex™ Snake Protective Chaps - Extra Large
    OHS policies affecting councils, landscape contractors and other businesses require adequate personal protective equipment (PPE) for employees. Protection for outside workers from snakes is an issue fast becoming a recognised critical need. The result of several months’ investigation, design and testing is Snakeprotex™. This is a pair of gaiters designed to protect the lower leg (knee to ankle).

    Five of the most common venomous Australian snakes were put in the vicinity of Snakeprotex™ and encouraged to bite the fabric which was fitted to a realistically sized dummy leg. None of the bites resulted in venom penetration through the garment. To quote from the test report provided by the herpetologist; “In all cases when a snake bit the gaiter on the modelleg or bit the gaiter separately, no venom was detected on the inside of the gaiter, even when examined under magnification.” For more information please contact Arborgreen.

    Measurement:
    Circumference at Knee: 560mm
    Length 400mm
    To fit leg circumference: Up to 530mm
    These sizes are approximate, and measured (leg circumference) over your trousers