Chain

  • OREGON Chain .050x3/8inx25ft Low Profile
    Oregon 3/8 inch LP Low Profile 91VX Chain
    A professional quality chain for occasional chainsaw users and also suitable for lightweight commercial applications, such as arborists, landscapers, builders etc.

    Advanced grind geometry and out-of-the-box sharpness
    Dramatic improvement in boring and bias cutting modes
    Extreme cutting efficiency with less feed force required
    BLUED CUTTERS for enhanced corrosion resistance and base cutter hardness consistency
    Recommended for: Electric saws up to 14 inch, Petrol saws up to 40cc,16 inch guide bars
  • OREGON Chain .063x3/8inx25ft SemiChisel
    Oregon S-70 Chain
    The chain that made modern lightweight saws possible.

    Round-cornered “semi-chisel” cutters work fast and are more tolerant of sharpening errors than most cutter types.
    Excellent performance in dusty or dirty conditions.
    Recommended for: Petrol saws up to 100cc, 12”-36” guide bars.
  • OREGON Chain .058x.325inx100ft
    A low-vibration semi-chisel chain for professional wood cutters who use .325” pitch saws.

    MICRO CHISEL® cutters have small-radius working corners for fast cutting and easy sharpening.
    Vibration at the handles is reduced 25% or more.
    Bumper drive links help reduce kickback.
    These chains now have the Witness Mark for more accurate sharpening.
    Recommended for: Petrol saws 38-66cc, 11”-20” guide bars
  • OREGON Chain .050x3/8inx25ft SemiChisel
    Oregon S-70 Chain
    The chain that made modern lightweight saws possible.

    Round-cornered “semi-chisel” cutters work fast and are more tolerant of sharpening errors than most cutter types.
    Excellent performance in dusty or dirty conditions.
    Recommended for: Petrol saws up to 100cc, 12”-36” guide bars.
  • OREGON Chain .058x3/8inx25ft SemiChisel
    Oregon S-70 Chain
    The chain that made modern lightweight saws possible.

    Round-cornered “semi-chisel” cutters work fast and are more tolerant of sharpening errors than most cutter types.
    Excellent performance in dusty or dirty conditions.
    Recommended for: Petrol saws up to 100cc, 12”-36” guide bars.
  • OREGON Chain.043x3/8inx100ft Low Profile
    Oregon Micro-lite 3/8 inch LP Low Profile 90SG Chain
    MICRO-LITE™ narrow-kerf cutting systems require less power from the saw to make the same length of cut than standard cutting systems.

    Low-vibration, low-kickback CHAMFER CHISEL cutters have an angular working corner for excellent
    performance and edge-holding durability.
    Narrow .043 inch gauge helps reduce the weight of the bar-chain combination approximately 15%.
    Always install 90SG chains on a .043 inch gauge MICRO-LITE™ bar (MLE part numbers) to obtain all the advantages of the MICRO-LITE™ system.
    NOTE: 90SG chains do not fit .050 inch gauge bars intended for the 91-series chains.

    Recommended for: Electric saws up to 14 inch, Petrol saws up to 40cc ,16 inch guide bars
  • OREGON Chain .063x3/8inx100ft SemiChisel (was OR75DP100R)
    Oregon S-70 Chain
    The chain that made modern lightweight saws possible.

    Round-cornered “semi-chisel” cutters work fast and are more tolerant of sharpening errors than most cutter types.
    Excellent performance in dusty or dirty conditions.
    Recommended for: Petrol saws up to 100cc, 12”-36” guide bars.