Tree Root Management

  • ROOT BARRIER Super Adhesive Joining Tape, 72mm x 30m/Roll
    This joining tape is essential in effectively and properly joining two edges of barrier together. If not used, there is a high risk of tree roots passing through the gap, even if it is overlapped, and causing unwanted damage to services, pavement and infrastructure. The holding power of the adhesive is not affected by water, and will fasten the two ends of barrier together for the life of the barrier itself. Installation
    instructions are available to installers.
  • ROOT Director 1050 mm Square
    Designed for the protection of pavements and hard landscaped areas, the ribbed Root Director system prevents root swirl and diverts root growth downward and outward thus avoiding the unsightly and hazardous root damage so commonly seen in urban areas.
    The Root Director’s rigid, one-piece construction makes installation simple. As a product within the ‘Arborsystem’ range, it is compatible with the RootRain irrigation system, RootCell load bearing soil structure and our extensive tree grille and guard range.
    Benefits
    • Protection for paved surrounds.
    • Encourages deep root growth.
    • Improved drought tolerance.
    • Greatly enhanced tree stability.
    • Integral ribbed construction which prevents root swirl.
    • Optional irrigation facility.
    • Compatible with Aborgreen Arborsystem products.
    • Simple to install.
    • 100% recycled plastic.
    Root Directors are the ideal root management solution for individual tree planting schemes. Contact Arborgreen for step by step installation instructions.
  • ROOT Director 600mm diam round, 400mm deep
    Trees planted in urban settings often require root systems to be directed below the level of hard pavements and road curbs, to prevent costly damage due to root heave. Once a road pavement surface or road curb is broken, water penetrates and encourages further shallow root growth, and the extent of pavement damage escalates rapidly. Often the most economical solution is to remove the tree, to the loss and detriment of the community and environment.

    Benefits include:

    Integral Lawn Edge
    Tapered sides
    Tough molded construction
    Recycled polymer
    Protection for paved surrounds
    Encourages deep root growth
    Improved drought tolerance
    Greatly enhanced tree stability
    Integral ribbed construction which prevents root swirl
    Compatible with CityGreen® tree pit products
    Simple to install

    Nominal opening diameter: 600mm

  • ROOT Director 900mm diam round, 400mm deep
    Trees planted in urban settings often require root systems to be directed below the level of hard pavements and road curbs, to prevent costly damage due to root heave. Once a road pavement surface or road curb is broken, water penetrates and encourages further shallow root growth, and the extent of pavement damage escalates rapidly. Often the most economical solution is to remove the tree, to the loss and detriment of the community and environment.

    Benefits include:

    Integral Lawn Edge
    Tapered sides
    Tough molded construction
    Recycled polymer
    Protection for paved surrounds
    Encourages deep root growth
    Improved drought tolerance
    Greatly enhanced tree stability
    Integral ribbed construction which prevents root swirl
    Simple to install
  • RootStop Recycled Root Barrier 1,500mm Deep x 30m Roll
    RootStop™ recycled root management barriers are continuous, non-ribbed root barriers designed for the larger application of protecting infrastructure and services. This size is made from 100% recycled (re-grind) material. The recycled properties make this barrier environmentally friendly, as well lowering the cost. Constructed from a special plastic formulation, which does not become brittle or break down in the soil. Standard roll length is 30m. Custom widths/lengths are also available for larger quantities.
  • RootStop Recycled Root Barrier 450mm Deep x 30m Roll
    RootStop™ recycled root management barriers are continuous, non-ribbed root barriers designed for the larger application of protecting infrastructure and services. This size is made from 100% recycled (re-grind) material. The recycled properties make this barrier environmentally friendly, as well lowering the cost. Constructed from a special plastic formulation, which does not become brittle or break down in the soil. Standard roll length is 30m. Custom widths/lengths are also available for larger quantities.
  • RootStop Recycled Root Barrier 600mm Deep x 30m Roll
    RootStop™ recycled root management barriers are continuous, non-ribbed root barriers designed for the larger application of protecting infrastructure and services. This size is made from 100% recycled (re-grind) material. The recycled properties make this barrier environmentally friendly, as well lowering the cost. Constructed from a special plastic formulation, which does not become brittle or break down in the soil. Standard roll length is 30m. Custom widths/lengths are also available for larger quantities.
  • RootStop Recycled Root Barrier 900mm Deep x 30m Roll
    RootStop™ recycled root management barriers are continuous, non-ribbed root barriers designed for the larger application of protecting infrastructure and services. This size is made from 100% recycled (re-grind) material. The recycled properties make this barrier environmentally friendly, as well lowering the cost. Constructed from a special plastic formulation, which does not become brittle or break down in the soil. Standard roll length is 30m. Custom widths/lengths are also available for larger quantities.
  • RootDeflector Dimpled Barrier 1000mm deep, 30m roll  (Special Ru
    This well known cuspated (or dimpled) barrier material is now available from Arborgreen. Although many installers prefer the vertically ribbed version as being most effective in deflecting roots downward, this material is still used in the tree planting and root management industries.
    Supplied in 30 metre rolls, this product depth is 1000mm.